PowerJet JT series

PowerJet JT series – All-electric injection moulding machine, 60–450 t

The PowerJet JT series is an all-electric injection moulding machine — every motion is driven by a servo-motor ball-screw system. No hydraulics, no oil, no leakage. Nine clamping-unit sizes are available from 600 kN up to 4,500 kN, and several injection units can be matched to each clamping unit — 11 standard (G) and 8 fast (K) units in total, with 17 screw-diameter options (Ø18–Ø95 mm). This modular system makes it possible to configure a single machine for a wide range of products.

The key benefit of all-electric drive is oil-free, clean operation: the JT series is the obligatory choice for medical ISO 7/8 clean-room, food-contact and optical production where hydraulic-oil contamination is not permitted. Energy savings of around 65% are achieved compared with a conventional servo-hydraulic machine, since the servo-motors only consume power under load — during idle and cooling phases, consumption is close to zero.

The 23-bit absolute encoder and EtherCAT-bus-based control deliver injection-position accuracy of ±0.01 mm and back-pressure control accuracy of ±0.1 MPa. The built-in OPC-UA communication enables immediate Industry 4.0 integration with MES/ERP systems.

Models

Model	Clamping force	Injection units	Screw Ø	Max. shot weight (PS)	Tie-bar spacing	Machine weight
JT60E	600 kN	B70G/K, B120G/K	Ø18–Ø28	60 g	550×550	3.0–3.2 t
JT90E	900 kN	B70G/K, B120G/K, B188G/K	Ø18–Ø36	109 g	620×620	3.6–4.5 t
JT120E	1,200 kN	B188G/K, B288G/K, B438G/K	Ø25–Ø45	248 g	690×690	4.8–5.2 t
JT160E	1,600 kN	B288G/K, B438G/K, B680G/K	Ø28–Ø50	367 g	770×770	5.2–6.0 t
JT200E	2,000 kN	B438G/K, B680G/K, B1000G/K	Ø32–Ø55	518 g	840×840	7.5–8.2 t
JT248E	2,480 kN	B680G/K, B1000G/K, B1320G/K	Ø36–Ø60	704 g	930×930	9.7–11.1 t
JT300E	3,000 kN	B1000G/K, B1320G/K, B1800G	Ø45–Ø70	1,095 g	1,040×1,040	13.2–14.2 t
JT360E	3,600 kN	B1320G/K, B1800G, B2250G	Ø50–Ø78	1,445 g	1,170×1,170	17.3–18.0 t
JT450E	4,500 kN	B1800G, B2250G, B3000G	Ø55–Ø95	2,270 g	1,300×1,300	22.5–23.5 t

Fields of application

• Medical: sterile syringe components, blood-collection tubes, dialysis cassettes, single-use devices – clean-room production
• 5G / electronics: micro-connectors, antenna components, mobile-phone and tablet housings, server-panel parts
• Automotive: precision gears, sensor housings, airbag components, interior trim parts
• Optical: lens frames, LED diffusers, camera-module frames, optical components
• Food / pharmaceutical packaging: PP/PE caps, dosing heads, flip-top caps, CIP-capable containers
• Industrial: pump components, valve bodies, precision instrument housings

Why choose this machine?

• 65% energy saving – servo-motors consume only under load; on a large machine this means tens of millions of HUF saved per year
• Oil-free, clean-room ready – obligatory for ISO 7/8 medical, optical and food-contact production
• ±0.01 mm injection-position accuracy – repeatable production even with sensitive PC, PEEK, PA+GF materials
• Modular injection-unit system – 9 clamping units × 19 injection-unit options × 17 screw sizes
• Industry 4.0 built in – EtherCAT bus, OPC-UA protocol, immediate MES/ERP integration
• CIS exclusive distributor – local service, spare-parts supply, commissioning, training